How to Fix a Drop-Down Visor on a Bell Helmet

A careful look at the 
Visit Helmet Gurus at: https://www.zotero.org/helmetgurus/cv
shows a variety of helmets with a drop-down visor or shield. You can lower or raise the drop-down visor to cover or open your face. The visor protects you from sun glare, dust, insects, and other wind-blown debris. Below is an overview of dealing with a malfunctioning drop-down visor.

Identifying the Problem

You have probably dealt with a fair share of problems as a motorcyclist. Wobbly tires, battery issues, hard starts, and poor braking are some problems motorcyclists routinely deal with. Fixing any of these problems requires you to diagnose the problem. Otherwise, you might not even know what to fix.

In the case of a drop-down visor, there are a few common problems to consider first:

Excessive movement – A loose visor that moves excessively up and down or feels wobbly

Stickiness – A stuck visor that requires a lot of force to operate; common culprits include debris, dirt, and inadequate lubrication

Broken detent – The detent bolds the visor in place so it won’t stay down if something breaks its detent mechanism.

Take time to diagnose the issue; a good diagnosis solves half the problem. You can engage your motorcycling friends, research internet forums, or search the Bell website for inspiration. You should also consult the owner’s manual for diagnosis clues.

⧐⧐⧐ Read More: https://www.jalopyjournal.com/....forum/threads/best-c

Fixing Common Problems

Once you identify the problem, the next step is to try your DIY skills on it. The appropriate solution and necessary tools depend on the problem. For example, fixing a loose visor requires you to tighten the visor screws. Use a screwdriver to turn and tighten the screws, taking care not to over-tighten and damage them.

Sometimes, you may have to replace worn-out parts that contribute to the looseness. For example, you may need to replace a worn O-ring that holds the visor mechanism. Contact Bell or your local hardware store for replacement parts. Make sure you know your helmet’s model to get the right part. You can check the Bell website or the Helmet Gurus for further inspiration.

If you have a sticky visor, you may need to clean and lubricate the mechanism. First, you need to remove the visor to access the mechanism. Next, use a rug or brush to wipe the visor rails or other moving parts of the mechanism. Lastly, lubricate the mechanism with a silicone-based lubricant.

⧐⧐⧐ Read More: https://mez.ink/helmetgurus

Seeking Professional Help

Your DIY skills might not solve all drop-down visor problems, especially if you lack the tools or skills. Complicated problems require professional solutions. For example, fixing or replacing the detent mechanism that holds the visor down requires helmet disassembly and reassembly. Ensure you get the exact part that works with your helmet model.

In addition, you should not tinker with your helmet if it is still under warranty. Otherwise, your efforts might void the warranty. Contact Bell Helmets for help if your visor is still under warranty. You may be lucky to get a free fix or replacement helmet if the issue falls under warranty.

Some people have superior DIY skills and can easily fix helmet issues. Others prefer to use professionals for all their motorcycle-related skills. Whatever side of the divide you fall on, the main thing is to fix your visor before riding. Seek advice from the Helmet Gurus on buying the next helmet if the current one fatally malfunctions.