Anhydrite Surfaces Primer in Dubai

PRIMER G
Synthetic resin based primer in water dispersion.

Applications:
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).

Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 - extremely low emission level.
Storage: 12 months. Protect from frost.

Reach-https://www.mapei.com/ae/en/pr....oducts-and-solutions

Adhesives for Swellable Bars Manufacturers Dubai
IDROSTOP

This is the best product used for Hydrophilic Adhesive Manufacturers in UAE

Hydrophilic expandable rubber section for watertight construction joints. Idrostop is a soft preformed flexible strip, with an acrylic polymer base specially designed to form watertight construction joints up to a hydraulic pressure of 5 atm. Idrostop does not contain bentonite. Due to its chemical composition Idrostop gradually expands when in permanent contact with water, creating an active barrier against pressurized water (positive and negative). Idrostop strip can be applied to concrete, metal, PVC and natural stone with Idrostop Mastic, a ready-to-use solvent-free one-component adhesive with a base of MS polymers. Packaging Idrostop is supplied in 3 sizes in carton boxes: - Idrostop 10 (size 20x10 mm): 6 rolls of 10 m; - Idrostop 15 (size 20x15 mm): 6 rolls of 7 m; - Idrostop 25 (size 20x25 mm): 6 rolls of 5 m.

reach-https://www.mapei.com/ae/en/pr....oducts-and-solutions

Coloured, waterproof polyurethane resin for balconies, terraces and roofs.
https://www.mapei.com/it/en/pr....oducts-and-solutions
Tools TOOLS
Grouts and sealants calculator
Concrete specification
Product selector for chemical anchors, elastic sealants and adhesives
MAPECOAT TNS Colorizer
Documentation DOCUMENTATION
Brochures, manuals, guides
Products information library
Wall finishing and thermal insulation products selector
LEED LEED
Leed V4 Tool
LEED synoptic
miscellaneous MISCELLANEOUS
Coloured grouts and sealants
Master Collection - Wall coatings
BIM
Calculation software CALCULATION SOFTWARE
Mapei Structural Design
Data Mapesilent
Mapefix Software Design
Applications APPLICATIONS
Mapei APP
Mapei Grouts APP

PURTOP EASY T
One-component transparent aliphatic polyurethane waterproofing membrane for terraces and balconies.
TECHNICAL DATA:
Consistency: liquid.
Waiting time between each coat: 8-24 hours at +23°C.
Colour: transparent.
Consumption: 1 kg/m² corresponds to a dry coat approx. 1 mm thick.
Storage: 12 months.
Packaging: 5 and 20 k

Strong Bonding Agent Supplier in UAE

PLANICRETE
Synthetic rubber latex for cementitious mixes.

Applications:
Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive for cement based adhesive slurries for anchoring bonded screeds, filling holes or repairing damaged sections of screeds, cementitious floors, etc. Additive for spatterdash to provide anchoring for renders. Do not use pure Planicrete as a primer or slurry, always mix it with Portland cement, or when required, with Mapecem, Mapecem Pronto, Topcem or Topcem Pronto.

Technical data:
Storage: 24 months. Protect from frost.

Consumption
depends on dilution and thickness of mortar.

Packaging
25 - 10 - 5 kg drums and 12x1 kg packs.

Reach-https://www.mapei.com/ae/en/pr....oducts-and-solutions

WHY TO USE TILE ADHESIVES
Whether it is a wall tile or a floor tile, the tile needs to stick properly to the foundation surface. It is anticipated that tile glue will hold the tile in place without having de-bonding problems for a very long time.
In construction projects, pre-mixed glue called tile adhesive is used to install tiles. It is created specifically for laying tiles using Portland cement, a few additives, and carefully selected fine aggregates.
Tile adhesives are used to fix a variety of tiles on horizontal and vertical masonry surfaces, interior and exterior wall surfaces, floors, swimming pools, timber substrates, and other substrates.

Different uses of Tile adhesives
1.Flooring
2.Wall cladding
3.Fixing glass and mosaic
4.Application between tiles


Searching for best tile adhesives in Dubai, we are here to help you. Mapei the best building manufacturing company in Dubai have different types of tile adhesives with best quality. Some of them are,

KERAFLEX MAXI S1
High performance, deformable cementitious adhesive with no vertical slip and extended open time for ceramic tiles. Especially suitable for the installation of large sized porcelain tiles and natural stone.
TECHNICAL DATA
Pot life: over 8 hours.
Open time (EN 1346): >30 minutes.
Set to light foot traffic: approx. 24 hours.
Ready for use: 7-14 days depending on actual temperature and RH.
Deformability according to ISO 13007-1 and EN 12002: S1 - deformable.
VOC g/l
Colours: grey and white.
Storage: 12 months.
Consumption: ceramic tiles - 1.2 kg/m2 per mm of thickness.
Packaging: 25 kg bags.


Visit-https://www.mapei.com/ae/en/contact-us