https://www.selleckchem.com/pr....oducts/2-aminoethane
MSi1-x,Alx)2 composites were produced by a pulsed laser reactive selective laser melting of MoSi2 and 30 wt.% AlSi10Mg powder mixture. The parametric study, altering the laser power between 100 and 300 W and scan speed between 400 and 1500 mm·s-1, has been conducted to estimate the effect of processing parameters on printed coupon samples' quality. It was shown that samples prepared at 150-200 W laser power and 400-500 mm·s-1 scan speed, as well as 250 W laser power along with 700 mm·s-1 scan speed, provide a relatively goo
إعجاب
علق
شارك
