https://www.selleckchem.com/pr....oducts/incb28060.htm
The passive nature leads to the reduction in the available actuator-sensor (AS) pairs while the directionality makes the signal processing a challenge. The proposed two-step methodology overcomes these shortcomings of FBG sensors. In the first step the amplitude weighted elliptical approach is used to identify the hotspots due to the inadequate number of AS pairs, the elliptical approach is not sufficient for damage localization. Therefore, in order to further localize the damage the edge reflection based ray-tracing approach is imple
Respect!
Kommentar
Delen
