MINIMUM IGNITION ENERGY Test - KELVN Safety Services Pvt Ltd.
The MINIMUM IGNITION ENERGY (MIE) of a dust –cloud is primarily used assess the likelihood of
ignition during processing and handling and to evaluate the need for precautions such as explosion
prevention systems.
The minimum ignition energy requirement for a combustible substance can be important in the
assessment of hazards in a plant. It can serve as a guideline for determining the scope of the protective
measures to be taken and to provide an insight for the general understanding of ignitions by static
electricity.

Website: https://www.kelvn.in/minimum-i....gnition-energy-mie-d

Accelerating Rate Calorimeter test - Powder safety services
Accelerating rate calorimetry (ARC) is a common tool used in thermal stability evaluation of hazardous materials to provide self-heat rate and pressure data that are used to model the kinetics of a reaction and even calculate relief vent sizing.
Website: https://www.kelvn.in/es-accele....rating-rate-calorime

Minimum Ignition energy test - KELVN Safety Services Pvt Ltd.
The MINIMUM IGNITION ENERGY (MIE) of a dust –cloud is primarily used assess the likelihood of
ignition during processing and handling and to evaluate the need for precautions such as explosion
prevention systems.
Website : https://www.kelvn.in/minimum-i....gnition-energy-mie-d

Rapid Screening Device Test
The RSD helps chemists and engineers quantify exothermic (and endothermic) reactions from materials of low hazard to high explosives.

The heated calorimeter chamber has a circular pathway to allow air (or inert gas) to circulate repeatedly during the test. The gas passes through the sample chamber and over the main heater. Circulation is achieved by a high temperature fan and a control thermocouple regulates power to the heater to implement the test protocol.
Website: https://www.kelvn.in/rapid-screening-device-rsd

Burning behavior test - KELVN Safety Services Pvt ltd.
Burning behavior test apparatus is used to determine the combustion severity of the material through deposition of the sample as a strip on non-porous plate and ignition trails are performed with the hot (1000°C) platinum wire which acts as an external source of ignition.
Website: https://www.kelvn.in/burning-behavior